EMU-35-50-75 Mechanical Seal

EMU-35-50-75 Mechanical Seal

Seal used for EMU Pumps and Mixers

Temperature: -40°C to 200°C

Pressure: up to 1.2MPa

Speed: up to 20m/s

Size: 35mm, 50mm, 75mm

Component  Seal --- Rock Metal have managed to successfully install thousands of seals worldwide.

Component  seals are composed of separate rotary and stationary parts. Unlike cartridge seals, component seals are not preassembled and require skilled technicians to install them. Incorrect installation of seal faces, O-rings, and seal axial setting on the pump shaft will result in reduced seal life or in some cases, immediate seal failure.

Advantages of Component  Seals

Reduced expenses on initial seal purchase

Reduced spares costs as the individual components can be stocked vs. the entire seal

Superior adaptability to very small pumps

Disadvantages of Component  Seals

The major disadvantage for component  seals are their susceptibility to damage. Component seals usually have exposed parts that are more susceptible to damage during transportation or installation.

Further, component seals require precise measurements during installation to prevent seal failure. Properly installing this type of seal requires more operator time and thus a higher cost to install or re-install after a repair.

EMU-35-50-75 Mechanical Seal,pump seal,EMU-35-50-75 Mechanical Seal,pump seal,EMU-35-50-75 Mechanical Seal,pump seal,EMU-35-50-75 Mechanical Seal,pump seal,EMU-35-50-75 Mechanical Seal,pump seal,